Wireless / Mobile Networks Infrastructure Solutions
The telecommunications industry has been one of the greatest drivers of innovation in the 21st century. The ever changing dynamics of this market, brought on by advancements in technology, coupled with consumer demands, has presented a challenge for most network operators.
WBT’s innovative approach to wireless infrastructure cabling and connectivity has proven to reduce CAPEX and OPEX for network builders.
Reduced cable congestion
Due to the reduced diameter of hybrid cables, congestion is reduced on the pole, allowing more room for additional RRU and cable deployments. A ½” hybrid cable can support one mobile sector. In addition, the 7/8” hybrid cable can support up to 4 RRU’s, and the 1 ¼” hybrid cable can support up to 9 RRU’s.
Easier network upgrades
The hybrid cabling systems for multiple RRU’s only needs to be installed once. Even if it is initially servicing 1 RRU, it has spare capacity for additional upgrades for up to 9 RRU’s. Rather than deploying extra cable up the pole, a simple hybrid jumper cable from the interface box to the RRU is connected to provide an extra service.
Click here to see the latest WB Networks ‘Wireless / Mobile Networks Infrastructure Solutions’ catalogue!
WB Networks has assembled a variety of all inclusive systems to house network infrastructure. This latest solution has been designed with industry leading technology to optimise 4G and 5G networks.
4 x RRU Solution – 7/8” Hybrid Cable
This hybrid 7/8” multi feed trunk cable with hybrid junction box is used as part of pre-terminated solution to allow for fast and easy installation. The hybrid junction box provides 4 x hybrid terminal port connections, combining optical and DC power in one hybrid plug-and-play connector, designed to provide 4F MPO and 8F MPO RRU connections.
This system includes:
7/8” Hybrid Trunk Cable with Junction box
On one end of the hybrid trunk cable is the BBU, preterminated with 2 x 12F MTP® connectors and 4 pair of unterminated copper cables. The other is connected to the RRU via 2 x pluggable bulkhead 4-pin DC power connections, and 2 x 12F MPO connectors, located at the bottom part of the hybrid junction box.
This feature allows easy installation of the 7/8” hybrid cable to the junction box, allowing separate access of the main trunk cable, without disturbing the internal optical and power wiring of the junction box.
2/4 Fibres, 1 Power – Hybrid
2/4 fibre Hybrid Jumper Cable
Weather-proof jumper cables (Interface Box to RRU)
Low loss, high performance optical connectors are used
Provides a 48V DC power feed
Flexible cable supplied in a corrugated jacket